Please note that all Equipment descriptions, photos and documentations on this site supplied to us by the Owner of the equipment are to be used as a guideline only.
A visit inspection will confirm the condition.
150 HP - WEIMA - Jumbo Shredder - Model WLK18J with:
- 150HP - Motor - 110 KW - 575 V / 60 Hz, 3 Phase.
- Opening of the hopper: 70.9 "x 72.6" (1,800x 1,845 mm).
- Configuration of the hopper: 4 straight sides, top of 4 flared sides.
- Opening of the machine: 70.9 "x 72.6" (1,800x 1,845 mm).
- Volume of the hopper: 7.1 cubic yards (5.4 m3).
- Rotor: Rotor in "V".
- Rotor diameter: 195 "(482 mm).
- Length of the rotor: 70.9 "(1,800 mm).
- Rotor speed *: 60-100 TPM.
- Type of knife: concave with 4 cutting edges.
- Knife size: 1.57 "x 1.57" (40 x 40 mm).
- Number of knives: 147.
- Size of the sieve holes: 3/4 "(15 / 20mm).
Weight and flow of the machine:
- Flow: 4,000-5,000 lbs / hr (1800 kg / hr).
- Weight: Approx. 34,000 lbs (15,455 kg).
- The rotor speed will be determined by the application and is fixed
- The flow indicated is an average and can be influenced by the density and size of the
material as well as sieve size, etc.
Included with the WLK Jumbo + Super Jumbo Series:
- 16 'of cable from the electrical box to the machine.
- Soft start with Star Delta starter.
- Anti-vibration foundation.
- "V" rotor system.
- Counter rotation.
- Hydraulic Turbo with hydraulic oil cooling.
- 40mm side walls.
- Limit switch for gearbox.
- 2 rows of rotor knives in "V" for 19 "rotor.
- 1.57 "x 1.57" concave knives with 4 cutting edges.
- Hydraulic rise of sieves.
The system includes:
Conveyor input in a straight line, with Tunnel type Metal Detector:
- Width 48 "x Length 384", inclined at 20 degrees angle.
- Belt # 53 with high performance cleats, 2 "high and 24" center.
- Unloading height 120 ".
- Side guards 18 "high with contour (skirt) UHMW.
- Engine 2CV 1 - (1.7riTentegf) - 75V / 3/60.
- D-Coil tunnel type metal detector.
Options also included:
- Ram with 4 serrated sides.
- Auger of discharge.
- Height elevation for Auger discharge.
- Electrical Contol Panel.
- The machine has only been used for 1000 hours.
- Loading not included.
- Sold " As is Were Is".